Securing a Machine Guard: July 2017 Safety & Hygiene Corner

Question:

What options do I have to secure a guard to a machine?

Answer:

You are required to attach guards to machines with bolts, screws, allen screws or other similar means requiring a tool to remove them.  Your other option is to install electrical interlocks which will cause the machine not to run if the guards are removed.  The availability of this option is dependent on the type of equipment and controls that are in place.  Keep in mind that your guard must not allow employees to reach around, under, over, or through the guard to access the hazard.  For more information, please see OSHA 29 CFR 1910.212 and ANSI B11.19 – Performance Requirements for Safeguarding.

Please contact your local BWC safety consultant if you are unsure if your machine is guarded properly.  They can perform a machine guarding assessment and offer recommendations to protect your employees from equipment hazards.

Brought to you by Ohio BWC safety consultants.

 

 

 

Advertisements

Guide to Hurricane Emergency Action Plans

The following is a message from our colleague Pat McCon, Sr. Risk Engineering Consultant, Zurich North America.

Customers and colleagues – good afternoon!

As Tropical Storm Cindy disrupts life on the Gulf Coast it’s time to remember to plan for hurricanes – and the less-powerful but often equally-damaging smaller storms.  And it’s not just in the southeastern United States – Tropical Storm Cindy has the potential to drop massive amounts of rain in the Tennessee and Ohio River Valleys if the path goes as predicted.

I’ve attached a copy of our ‘Easy/tough guide to starting a hurricane emergency action plan”.  A number of other resources are available at http://www.zurichna.com/en/knowledge/topics/windstorm.

You may or may not have properties in the areas predicted to be affected by the present storm.  If that’s the case, good – you have time to make solid preparations for when the storm comes.  Are you absolutely not exposed to tropical windstorm hazards?  I’ll bet you know someone who is – please feel free to share this information with anyone who may find it useful.

Best wishes for a safe summer.  Please feel free to contact me at pat.mccon@zurichna.com if we can be of any assistance in helping you protect your property and your people.

Pat

Anti-Fatigue Matting: June 2017 Safety & Hygiene Corner

Question:

I know there are not “standards”…but are there any recommendations concerning anti-fatigue matting for an employee who stands in one area a given length of time?

Answer:

There are no standards, but there here are some good recommendations:

  • First, check shoe wear – always recommend tuft gum sole, and heel – both provide support and are slip and chemical resistance
  • If you have an employee standing in an area more than one hour straight, a mat or other measures should be employed.
  • Or if an employee stands 50 % of the time on a job, a sit stand should be provided (if appropriate) or a foot rails to rest lower extremities, are a good option.
  • Anti-fatigue matting should be at least 1 inch thick – with tapered edges
  • Also mating needs to be placed on a preventative maintenance program for wear and tear issues.
  • Be sure the mat is easy to clean
  • Anti-fatigue mats are engineered to make the body naturally and imperceptibly sway, which encourages subtle movement of the leg muscles. This promotes blood flow and prevents stagnation in the veins – and, incidentally, burns more calories! So, what you’re looking for in a mat is one that’s not so hard it discourages muscle movement, but not so springy it requires too much energy to maintain balance, creating a different kind of stress.

There are 2 key words for prolonged standing risk factors – is the type of posture and repetition being completed by the employee.

The monthly Safety and Hygiene Corner is written by Ohio BWC experts for local Ohio Safety Council programs.